Craftsman Window Trim – Hi, good friends! It’s Lauren from Bless’ er Residence, and I’m enjoyed be back sharing more Do It Yourself benefits from our newest home wrongdoings.
If you’ve never ever seen my little corner of the internet, my spouse and I get on a goal to bring lots of character and also charm to our really fundamental building contractor box residence.
This moment two years ago, our living room appeared like this:
Given that starting our homeowning trip, we’ve discovered that the top 3 means to transform a space in a substantial means is with paint, long drapes, and architectural information.
We currently dealt with the paint and drapes component in 2014, and when we threw our Do It Yourself fake fire place right into the mix, the area suddenly looked 10 times larger! But something it was missing out on in the character division- window trim.
So we determined it was time to fix that.
By the way, Pandora radio is an essential in any type of Do It Yourself project at our home. Activate some 80s jams, make it a date, as well as reach beautifying the location.
Besides your tunes, here’s just what you’ll require.
Simple DIY Craftsman Window Trim
( The below materials are just what you’ll need for one basic 35.5 ″ x 59.5 ″ window.).
1 ″ x2 ″ x8 ′ board.
2- 1 ″ x4 ″ x8 ′ boards.
1 ″ × 6 ″ x8 ′ board.
2-in brad nails.
Mix square tool.
Hammer or fingernail weapon.
White trim caulk.
Great grit sandpaper.
Paint (I utilized Sherwin Williams Pure White to match our fireplace and also baseboards.).
Round saw or table saw.
We had five windows to include trim to, so we had quite a bit extra wood than what is in that listing. The most effective component though is this calls for very primary carpentry skills, so this is an excellent job if you’re a beginner in your home renovation. No difficult angled cuts!
1 – We began by constructing the header first as well as gauged the leading size of our window then included 10 inches to that dimension to permit a 5 inch overhang on each side of the window.
We marked that measurement on a 1 ″ x6 ″ board using the square tool to note a straight line.
After that, utilizing our circular saw, we cut the 1 ″ x6 ″ board.
We made use of the very same measurement from our 1 ″ x6 ″ to note as well as cut two pieces of 1 ″ x2 ″ boards. Since we had actually three home windows clustered together to make one large window, we worked from a 12 foot size board.
When the 1 ″ x2 ″ s were cut, we connected them to every side of the 1 ″ x6 ″ board with wood screws (as revealed below).
Our header had to be very long for our large window, and considering that we couldn’t locate 1 ″ x2 ″ x12 ′ boards, we needed to cut as well as attach our 1 ″ x2 ″ s in 6 items to the much longer 1 ″ x6 ″ x12 ′ board.
Then we had our header!
As soon as we focused our brand-new header over the home windows, we nailed them into place. We used a great ol’ fashioned hammer considering that the dimension of our nails would not work in our nail weapon.
Lookin’ much better already, right?
2 – Next area was the window sill. We serviced this larger window in thirds as well. Your whole window sill ought to be the same length as your header was.
We noted the width we required for the sill on an additional 1 ″ x6 ″ board as well as cut utilizing our round saw.
Then, making use of the recently cut 1 ″ x6 “board, we noted on the wall surface where the sill need to finish (5 inch overhang) as well as stood up the board to note the window’s side.
We determined the window’s deepness too.
We noted those 2 dimensions (the window’s width and deepness) on the 1 ″ x6 ″ board.
Using our square tool once more, we marked the straight lines between the dimensions.
Then quit with a jigsaw.
After our cuts, below’s just what our 1 ″ x6 ″ board looked like.
We fit our recently reduced 1 ″ x6 ″ board right into location as well as accomplished in to form our window sill.
3 – To make the sides of the window, we made use of 1 ″ x4 ″ boards.
We simply determined the elevation in between the bottom of the header (from action 1) as well as the top of the sill (from step 2) to recognize at what length to reduce the 1 ″ x4 ″ board.
In working with our huge window, the two sections in the center of our three windows were a little larger than a 1 ″ x4 ″ board at 4.74 ″. So we needed to reduce 2 1 ″ x6 ″ boards lengthwise to earn them the exact width we required.
We lined the sides up on the side of the windows and toenailed them into area.
4 – For the last carpentry action, we added our apron (the timber piece beneath the window sill).
We determined the size from the outside edge of the 1 ″ x4 ″ side item to the other outdoors edge of the 1 ″ x4 ″ side item to discover how much time to cut the 1 ″ x4 ″ board for the apron.
If you’re a visual individual, this could assist to show you how we developed the trim for our bigger window.
5 – Then caulk like insane! Additionally referred to as a carpenter’s best friend.
Caulk all the joints and also load the nail holes and knots with wood filler. Let completely dry and sand till smooth.
6 – Ultimately, repaint every one of your new trim. We did two layers of primer+ paint in one.
We benefited from the scenario by dressing up … er … cutting out our dining room window also.
After we put our curtains back up, I was astonished at the distinction it made! It resembles our windows were destined for Craftsman trim all along.
Our home windows look beautiful with our fireplace too. Very soon, we’ll be placing an area rug in right here making this room finished. As well as I hope to place beam of lights on our ceiling ultimately, yet I may be pushing my luck there.
As you can inform our dog, snoozing on the back of our seat there, is very satisfied.
You could see even more resources and also Dos it yourself from this area over on Bless’ emergency room House.
What do you believe? Something you might try? Trimming out home windows truly is a big room changer. I can’t wait to tackle the remainder of our upstairs home windows with it.
How to Install Craftsman Style Window Trim
When we purchased our Minneapolis house seven years ago, it was very plain. The home was full of conventional attributes and also didn’t have any type of character. Throughout the last few years, we have actually been gradually upgrading the house to draw out our individuality and also generate higher-end personalized projects to increase our residence’s worth. This procedure has actually taught us that also the apparently little tasks make a large impact in your house.
As part of our master collection remodel, we’re upgrading every one of our window trim from the boring, standard style to a stunning Craftsman Style trim that is actually high-impact.
How to Mount Craftsman Design Window Trim
There are various designs of updated window trim that you could put on your home windows. Justin & I are mosting likely to reveal you exactly how we installed a simplified Craftsman Style trim that brings a modern-day planning to our residence. We’ll be sharing each action with you, so while this could look daunting– we understand you could do it!
Fingernail Weapon, Trim Gun, or Brad Nailer
Ruler or Gliding T-Square
Now allow’s get going!
Beginning by removing the existing window trim utilizing a crowbar. Attempt your best to not penetrate or break the sheetrock surrounding the windows while you’re getting rid of.
Ways to mount Craftsman Design Window Trim|Home Upcoming for tealandlime.com
When our existing trim was gotten rid of, we saw that the expansion jam of the window (aka. the wooden framework that surrounds your window) wasn’t broad enough due to the fact that it had not been broad sufficient to satisfy our Sheetrock.
Carpenter’s Idea # 1:
The expansion jam around your window has to be flush with your wall before the trim could be used. Considering that our jam was as well little, we constructed a brand-new jam with 1 ″ x4 ″ pine, which was measured and reduced to fit.
Carpenter’s Idea # 2:
To avoid the material from splitting, you should pre-drill openings utilizing a 1/8 ″ drill bit (this could be used on a normal drill). Then after the openings have been pre-drilled, screw the extension jam into the window frame making use of a 3 ″ trim head screw and also your impact drill.
Carpenter’s Suggestion # 3:
Prior to installing your trim, action 1/4 ″ from the side of your window expansion jam to be exposed for the layered appearance we’re going for. We used a moving t-square to determine this in several points on our jam, which we then made use of as an overview when mounting the trim.
Also, cutting a scrap of our 1 ″ x 4 ″ side pieces (also known as case), we held it in position and noted the outdoors side in order to help us determine the step for the Head Item.
Starting with the 5/4 ″ x 6 ″ head piece of ache, we determined as well as reduced the board to be 3/4 ″ longer than the window case (that we simply marked) on each side. Secure in place utilizing 2-1/2 ″ trim nails as well as your finish nailer.
Then, for the layered look, we added the want 2 ″ x 2 ″ on top, cut to be 3/4 ″ longer than the head piece. Safeguard right into place making use of timber glue & trim nails.
Woodworker’s Idea # 4:
Timber glue is your buddy! Be sure to apply timber adhesive to every wood-to-wood call. This will certainly give a more protected as well as long-term hold.
Then we went on to the sill & apron (aka all-time low) of the window. The 1 ″ x 4 ″ apron must coincide size as your Head item, which was 3/4 ″ longer compared to the window casing on each side.
Woodworker’s Tip # 5:
Mount your apron before your sill making it easier to nail as well as safeguard whatever in position. We made use of a scrap item of timber at the exact same density as our sill (5/4 ″) to identify the right elevation of the apron prior to securing.
Keep in mind: If your sill piece is flush with the Sheetrock, you don’t have to place on a miter return (the tilted edge item that returns to the wall surface) on if you’re preparing to repaint your sill. You could rather use a square cut item of ache and also avoid the next action below. If you’re intending to stain your sill, after that comply with the directions below ensure that there’s no end grain showing.
Cut a 45 level angle using your miter saw on each end of your 5/4 ″ x 2 ″ sill as well as connect to the apron. Connect by applying wood glue, then toenailing in place. Procedure the range from the lengthy point of your angle to the wall– you’ll need this measurement in a 2nd.
Gluing the Sill
After that reduce your return piece (also known as. the smaller sized item of timber that finishes the edge) at a 45 degree angle on one side of the piece, as well as a square cut beyond using your lengthy point measurement. Attach by using timber glue, then fingernailing in position.
Last but not least, step between your head piece and also your sill item and also cut your 1 ″ x 4 ″ casing to that length for the side pieces. Glue the ends where they fulfill the sill and also header, and also affix the casing to the expansion jam (using 1-1/4 ″ brad nails) and also wall (utilizing 2 ″ trim nails).
Last Window Sill and Apron
And also, the difficult part is done! (Completely sounds tougher than it is.) The rest is ending up touches.
Fill up all the nail holes utilizing wood filler, permit to dry, after that sand smooth.
Carpenter’s Suggestion # 6:
” Damage the sides” by rounding slightly with sandpaper. This method not just soften the edges yet will certainly likewise assist the paint stick on the brink.
After that paint or discolor & poly your window trim based on your design selections. We decided to painting our window trim white to match our color palette.
Carpenter’s Pointer # 7:
The last idea is to constantly apply a grain of caulk on every seam of the trim– inside sides as well as out– when you’re painting your trim. This will certainly provide it a more finished look and also hide any flaws and/or voids in between each piece. Sadly, if you’re staining your trim, this suggestion doesn’t apply since the caulk would reveal.
That’s it! Below’s a last picture of our Craftsman Design window trim before being topped, repainted and caulked.
And here it seeks being primed, repainted and also caulked.
Huge influence, right?
If you need to know even more about us, comply with along on our home remodel or see the Do It Yourself jobs we’re servicing, swing by Residence Upcoming for a go to!